The type implementing this traversable
The type implementing this traversable
A class supporting filtered operations.
Creates a new set with an additional element, unless the element is already present.
Creates a new set with an additional element, unless the element is already present.
the element to be added
a new set that contains all elements of this set and that also
contains elem.
Creates a new set with a given element removed from this set.
Creates a new set with a given element removed from this set.
the element to be removed
a new set that contains all elements of this set but that does not
contain elem.
The empty set of the same type as this set
The empty set of the same type as this set
an empty set of type This.
Creates a new set of this kind from an array of longs
Creates a new set of this kind from an array of longs
The number of words (each with 64 bits) making up the set
The number of words (each with 64 bits) making up the set
The words at index idx, or 0L if outside the range of the set
Note: requires idx >= 0
The words at index idx, or 0L if outside the range of the set
Note: requires idx >= 0
Test two objects for inequality.
Test two objects for inequality.
true if !(this == that), false otherwise.
Equivalent to x.hashCode except for boxed numeric types and null.
Equivalent to x.hashCode except for boxed numeric types and null.
For numerics, it returns a hash value which is consistent
with value equality: if two value type instances compare
as true, then ## will produce the same hash value for each
of them.
For null returns a hashcode where null.hashCode throws a
NullPointerException.
a hash value consistent with ==
Computes the intersection between this bitset and another bitset by performing a bitwise "and".
Computes the intersection between this bitset and another bitset by performing a bitwise "and".
the bitset to intersect with.
a new bitset consisting of all elements that are both in this
bitset and in the given bitset other.
Computes the intersection between this set and another set.
Computes the intersection between this set and another set.
Note: Same as intersect.
the set to intersect with.
a new set consisting of all elements that are both in this
set and in the given set that.
Computes the difference of this bitset and another bitset by performing a bitwise "and-not".
Computes the difference of this bitset and another bitset by performing a bitwise "and-not".
the set of bits to exclude.
a bitset containing those bits of this
bitset that are not also contained in the given bitset other.
The difference of this set and another set.
The difference of this set and another set.
Note: Same as diff.
the set of elements to exclude.
a set containing those elements of this
set that are not also contained in the given set that.
Creates a new bitset with additional elements.
Creates a new bitset with additional elements.
This method takes two or more elements to be added. Another overloaded variant of this method handles the case where a single element is added.
the first element to add.
the second element to add.
the remaining elements to add.
a new bitset with the given elements added.
Creates a new bitset by adding all elements contained in another collection to this bitset.
Creates a new bitset by adding all elements contained in another collection to this bitset.
the collection containing the added elements.
a new bitset with the given elements added.
[use case] Returns a new bitset containing the elements from the left hand operand followed by the elements from the right hand operand.
Returns a new bitset containing the elements from the left hand operand followed by the elements from the right hand operand. The element type of the bitset is the most specific superclass encompassing the element types of the two operands.
Example:
scala> val a = LinkedList(1) a: scala.collection.mutable.LinkedList[Int] = LinkedList(1) scala> val b = LinkedList(2) b: scala.collection.mutable.LinkedList[Int] = LinkedList(2) scala> val c = a ++ b c: scala.collection.mutable.LinkedList[Int] = LinkedList(1, 2) scala> val d = LinkedList('a') d: scala.collection.mutable.LinkedList[Char] = LinkedList(a) scala> val e = c ++ d e: scala.collection.mutable.LinkedList[AnyVal] = LinkedList(1, 2, a)
the element type of the returned collection.
the traversable to append.
a new bitset which contains all elements of this bitset
followed by all elements of that.
As with ++, returns a new collection containing the elements from the
left operand followed by the elements from the right operand.
As with ++, returns a new collection containing the elements from the
left operand followed by the elements from the right operand.
It differs from ++ in that the right operand determines the type of
the resulting collection rather than the left one.
Mnemonic: the COLon is on the side of the new COLlection type.
Example:
scala> val x = List(1) x: List[Int] = List(1) scala> val y = LinkedList(2) y: scala.collection.mutable.LinkedList[Int] = LinkedList(2) scala> val z = x ++: y z: scala.collection.mutable.LinkedList[Int] = LinkedList(1, 2)
This overload exists because: for the implementation of ++: we should
reuse that of ++ because many collections override it with more
efficient versions.
Since TraversableOnce has no ++ method, we have to implement that
directly, but Traversable and down can use the overload.
the element type of the returned collection.
the class of the returned collection. Where possible, That is
the same class as the current collection class Repr, but this
depends on the element type B being admissible for that class,
which means that an implicit instance of type CanBuildFrom[Repr, B, That]
is found.
the traversable to append.
an implicit value of class CanBuildFrom which determines
the result class That from the current representation type Repr and
and the new element type B.
a new collection of type That which contains all elements
of this bitset followed by all elements of that.
[use case] As with ++, returns a new collection containing the elements from the left operand followed by the
elements from the right operand.
As with ++, returns a new collection containing the elements from the left operand followed by the
elements from the right operand.
It differs from ++ in that the right operand determines the type of
the resulting collection rather than the left one.
Mnemonic: the COLon is on the side of the new COLlection type.
Example:
scala> val x = List(1) x: List[Int] = List(1) scala> val y = LinkedList(2) y: scala.collection.mutable.LinkedList[Int] = LinkedList(2) scala> val z = x ++: y z: scala.collection.mutable.LinkedList[Int] = LinkedList(1, 2)
the element type of the returned collection.
the traversable to append.
a new bitset which contains all elements of this bitset
followed by all elements of that.
Creates a new bitset from this bitset with some elements removed.
Creates a new bitset from this bitset with some elements removed.
This method takes two or more elements to be removed. Another overloaded variant of this method handles the case where a single element is removed.
the first element to remove.
the second element to remove.
the remaining elements to remove.
a new bitset that contains all elements of the current bitset except one less occurrence of each of the given elements.
Creates a new bitset from this bitset by removing all elements of another collection.
Creates a new bitset from this bitset by removing all elements of another collection.
the collection containing the removed elements.
a new bitset that contains all elements of the current bitset
except one less occurrence of each of the elements of elems.
Applies a binary operator to a start value and all elements of this bitset, going left to right.
Applies a binary operator to a start value and all elements of this bitset, going left to right.
Note: /: is alternate syntax for foldLeft; z /: xs is the same as
xs foldLeft z.
Examples:
Note that the folding function used to compute b is equivalent to that used to compute c.
scala> val a = LinkedList(1,2,3,4) a: scala.collection.mutable.LinkedList[Int] = LinkedList(1, 2, 3, 4) scala> val b = (5 /: a)(_+_) b: Int = 15 scala> val c = (5 /: a)((x,y) => x + y) c: Int = 15
Note: might return different results for different runs, unless the underlying collection type is ordered. or the operator is associative and commutative.
the result type of the binary operator.
the start value.
the binary operator.
the result of inserting op between consecutive elements of this bitset,
going left to right with the start value z on the left:
op(...op(op(z, x_1), x_2), ..., x_n)
where x1, ..., xn are the elements of this bitset.
Applies a binary operator to all elements of this bitset and a start value, going right to left.
Applies a binary operator to all elements of this bitset and a start value, going right to left.
Note: :\ is alternate syntax for foldRight; xs :\ z is the same as
xs foldRight z.
Note: might return different results for different runs, unless the underlying collection type is ordered. or the operator is associative and commutative.
Examples:
Note that the folding function used to compute b is equivalent to that used to compute c.
scala> val a = LinkedList(1,2,3,4) a: scala.collection.mutable.LinkedList[Int] = LinkedList(1, 2, 3, 4) scala> val b = (a :\ 5)(_+_) b: Int = 15 scala> val c = (a :\ 5)((x,y) => x + y) c: Int = 15
the result type of the binary operator.
the start value
the binary operator
the result of inserting op between consecutive elements of this bitset,
going right to left with the start value z on the right:
op(x_1, op(x_2, ... op(x_n, z)...))
where x1, ..., xn are the elements of this bitset.
Test two objects for equality.
Test two objects for equality.
The expression x == that is equivalent to if (x eq null) that eq null else x.equals(that).
true if the receiver object is equivalent to the argument; false otherwise.
Computes the symmetric difference of this bitset and another bitset by performing a bitwise "exclusive-or".
Computes the symmetric difference of this bitset and another bitset by performing a bitwise "exclusive-or".
the other bitset to take part in the symmetric difference.
a bitset containing those bits of this bitset or the other bitset that are not contained in both bitsets.
Appends all elements of this bitset to a string builder using start, end, and separator strings.
Appends all elements of this bitset to a string builder using start, end, and separator strings.
The written text begins with the string start and ends with the string end.
Inside, the string representations (w.r.t. the method toString)
of all elements of this bitset are separated by the string sep.
Example:
scala> val a = LinkedList(1,2,3,4) a: scala.collection.mutable.LinkedList[Int] = LinkedList(1, 2, 3, 4) scala> val b = new StringBuilder() b: StringBuilder = scala> a.addString(b, "LinkedList(", ", ", ")") res1: StringBuilder = LinkedList(1, 2, 3, 4)
the starting string.
the separator string.
the ending string.
the string builder b to which elements were appended.
Appends all elements of this bitset to a string builder.
Appends all elements of this bitset to a string builder.
The written text consists of the string representations (w.r.t. the method
toString) of all elements of this bitset without any separator string.
Example:
scala> val a = LinkedList(1,2,3,4) a: scala.collection.mutable.LinkedList[Int] = LinkedList(1, 2, 3, 4) scala> val b = new StringBuilder() b: StringBuilder = scala> val h = a.addString(b) b: StringBuilder = 1234
the string builder to which elements are appended.
the string builder b to which elements were appended.
Appends all elements of this bitset to a string builder using a separator string.
Appends all elements of this bitset to a string builder using a separator string.
The written text consists of the string representations (w.r.t. the method toString)
of all elements of this bitset, separated by the string sep.
Example:
scala> val a = LinkedList(1,2,3,4) a: scala.collection.mutable.LinkedList[Int] = LinkedList(1, 2, 3, 4) scala> val b = new StringBuilder() b: StringBuilder = scala> a.addString(b, ", ") res0: StringBuilder = 1, 2, 3, 4
the string builder to which elements are appended.
the separator string.
the string builder b to which elements were appended.
Aggregates the results of applying an operator to subsequent elements.
Aggregates the results of applying an operator to subsequent elements.
This is a more general form of fold and reduce. It has similar
semantics, but does not require the result to be a supertype of the
element type. It traverses the elements in different partitions
sequentially, using seqop to update the result, and then applies
combop to results from different partitions. The implementation of
this operation may operate on an arbitrary number of collection
partitions, so combop may be invoked an arbitrary number of times.
For example, one might want to process some elements and then produce
a Set. In this case, seqop would process an element and append it
to the list, while combop would concatenate two lists from different
partitions together. The initial value z would be an empty set.
pc.aggregate(Set[Int]())(_ += process(_), _ ++ _)
Another example is calculating geometric mean from a collection of doubles (one would typically require big doubles for this).
the type of accumulated results
the initial value for the accumulated result of the partition - this
will typically be the neutral element for the seqop operator (e.g.
Nil for list concatenation or 0 for summation)
an operator used to accumulate results within a partition
an associative operator used to combine results from different partitions
Composes two instances of Function1 in a new Function1, with this function applied first.
Composes two instances of Function1 in a new Function1, with this function applied first.
the result type of function g
a function R => A
a new function f such that f(x) == g(apply(x))
Tests if some element is contained in this set.
Tests if some element is contained in this set.
This method is equivalent to contains. It allows sets to be interpreted as predicates.
the element to test for membership.
true if elem is contained in this set, false otherwise.
Cast the receiver object to be of type T0.
Cast the receiver object to be of type T0.
Note that the success of a cast at runtime is modulo Scala's erasure semantics.
Therefore the expression 1.asInstanceOf[String] will throw a ClassCastException at
runtime, while the expression List(1).asInstanceOf[List[String]] will not.
In the latter example, because the type argument is erased as part of compilation it is
not possible to check whether the contents of the list are of the requested type.
the receiver object.
if the receiver object is not an instance of the erasure of type T0.
Method called from equality methods, so that user-defined subclasses can refuse to be equal to other collections of the same kind.
Method called from equality methods, so that user-defined subclasses can refuse to be equal to other collections of the same kind.
The object with which this bitset should be compared
true, if this bitset can possibly equal that, false otherwise. The test
takes into consideration only the run-time types of objects but ignores their elements.
Create a copy of the receiver object.
[use case] Builds a new collection by applying a partial function to all elements of this bitset on which the function is defined.
Builds a new collection by applying a partial function to all elements of this bitset on which the function is defined.
the element type of the returned collection.
the partial function which filters and maps the bitset.
a new bitset resulting from applying the given partial function
pf to each element on which it is defined and collecting the results.
The order of the elements is preserved.
Finds the first element of the bitset for which the given partial function is defined, and applies the partial function to it.
Finds the first element of the bitset for which the given partial function is defined, and applies the partial function to it.
Note: might return different results for different runs, unless the underlying collection type is ordered.
the partial function
an option value containing pf applied to the first
value for which it is defined, or None if none exists.
Seq("a", 1, 5L).collectFirst({ case x: Int => x*10 }) = Some(10)
Comparison function that orders keys.
Comparison function that orders keys.
Composes two instances of Function1 in a new Function1, with this function applied last.
Composes two instances of Function1 in a new Function1, with this function applied last.
the type to which function g can be applied
a function A => T1
a new function f such that f(x) == apply(g(x))
Tests if some element is contained in this set.
Tests if some element is contained in this set.
the element to test for membership.
true if elem is contained in this set, false otherwise.
[use case] Copies elements of this bitset to an array.
Copies elements of this bitset to an array.
Fills the given array xs with at most len elements of
this bitset, starting at position start.
Copying will stop once either the end of the current bitset is reached,
or the end of the array is reached, or len elements have been copied.
the array to fill.
the starting index.
the maximal number of elements to copy.
[use case] Copies values of this bitset to an array.
Copies values of this bitset to an array.
Fills the given array xs with values of this bitset.
Copying will stop once either the end of the current bitset is reached,
or the end of the array is reached.
the array to fill.
[use case] Copies values of this bitset to an array.
Copies values of this bitset to an array.
Fills the given array xs with values of this bitset, beginning at index start.
Copying will stop once either the end of the current bitset is reached,
or the end of the array is reached.
the array to fill.
the starting index.
Copies all elements of this bitset to a buffer.
Copies all elements of this bitset to a buffer.
The buffer to which elements are copied.
Counts the number of elements in the bitset which satisfy a predicate.
Counts the number of elements in the bitset which satisfy a predicate.
the predicate used to test elements.
the number of elements satisfying the predicate p.
Computes the difference of this set and another set.
Computes the difference of this set and another set.
the set of elements to exclude.
a set containing those elements of this
set that are not also contained in the given set that.
Selects all elements except first n ones.
Selects all elements except first n ones.
Note: might return different results for different runs, unless the underlying collection type is ordered.
the number of elements to drop from this bitset.
a bitset consisting of all elements of this bitset except the first n ones, or else the
empty bitset, if this bitset has less than n elements.
Selects all elements except last n ones.
Selects all elements except last n ones.
Note: might return different results for different runs, unless the underlying collection type is ordered.
The number of elements to take
a bitset consisting of all elements of this bitset except the last n ones, or else the
empty bitset, if this bitset has less than n elements.
Drops longest prefix of elements that satisfy a predicate.
Drops longest prefix of elements that satisfy a predicate.
Note: might return different results for different runs, unless the underlying collection type is ordered.
the longest suffix of this bitset whose first element
does not satisfy the predicate p.
Tests whether the argument (arg0) is a reference to the receiver object (this).
Tests whether the argument (arg0) is a reference to the receiver object (this).
The eq method implements an equivalence relation on
non-null instances of AnyRef, and has three additional properties:
x and y of type AnyRef, multiple invocations of
x.eq(y) consistently returns true or consistently returns false.x of type AnyRef, x.eq(null) and null.eq(x) returns false.null.eq(null) returns true. When overriding the equals or hashCode methods, it is important to ensure that their behavior is
consistent with reference equality. Therefore, if two objects are references to each other (o1 eq o2), they
should be equal to each other (o1 == o2) and they should hash to the same value (o1.hashCode == o2.hashCode).
true if the argument is a reference to the receiver object; false otherwise.
Compares this set with another object for equality.
Compares this set with another object for equality.
Note: This operation contains an unchecked cast: if that
is a set, it will assume with an unchecked cast
that it has the same element type as this set.
Any subsequent ClassCastException is treated as a false result.
the other object
true if that is a set which contains the same elements
as this set.
Tests whether a predicate holds for some of the elements of this bitset.
Tests whether a predicate holds for some of the elements of this bitset.
the predicate used to test elements.
true if the given predicate p holds for some of the
elements of this bitset, otherwise false.
Selects all elements of this bitset which satisfy a predicate.
Selects all elements of this bitset which satisfy a predicate.
the predicate used to test elements.
a new bitset consisting of all elements of this bitset that satisfy the given
predicate p. The order of the elements is preserved.
Selects all elements of this bitset which do not satisfy a predicate.
Selects all elements of this bitset which do not satisfy a predicate.
the predicate used to test elements.
a new bitset consisting of all elements of this bitset that do not satisfy the given
predicate p. The order of the elements is preserved.
Called by the garbage collector on the receiver object when there are no more references to the object.
Called by the garbage collector on the receiver object when there are no more references to the object.
The details of when and if the finalize method is invoked, as
well as the interaction between finalize and non-local returns
and exceptions, are all platform dependent.
Finds the first element of the bitset satisfying a predicate, if any.
Finds the first element of the bitset satisfying a predicate, if any.
Note: might return different results for different runs, unless the underlying collection type is ordered.
the predicate used to test elements.
an option value containing the first element in the bitset
that satisfies p, or None if none exists.
Returns the first key of the collection.
Returns the first key of the collection.
[use case] Builds a new collection by applying a function to all elements of this bitset and using the elements of the resulting collections.
Builds a new collection by applying a function to all elements of this bitset and using the elements of the resulting collections.
For example:
def getWords(lines: Seq[String]): Seq[String] = lines flatMap (line => line split "\\W+")
The type of the resulting collection is guided by the static type of bitset. This might cause unexpected results sometimes. For example:
// lettersOf will return a Seq[Char] of likely repeated letters, instead of a Set def lettersOf(words: Seq[String]) = words flatMap (word => word.toSet) // lettersOf will return a Set[Char], not a Seq def lettersOf(words: Seq[String]) = words.toSet flatMap (word => word.toSeq) // xs will be a an Iterable[Int] val xs = Map("a" -> List(11,111), "b" -> List(22,222)).flatMap(_._2) // ys will be a Map[Int, Int] val ys = Map("a" -> List(1 -> 11,1 -> 111), "b" -> List(2 -> 22,2 -> 222)).flatMap(_._2)
the element type of the returned collection.
the function to apply to each element.
a new bitset resulting from applying the given collection-valued function
f to each element of this bitset and concatenating the results.
Folds the elements of this bitset using the specified associative binary operator.
Folds the elements of this bitset using the specified associative binary operator.
The order in which operations are performed on elements is unspecified and may be nondeterministic.
a type parameter for the binary operator, a supertype of A.
a neutral element for the fold operation; may be added to the result
an arbitrary number of times, and must not change the result (e.g., Nil for list concatenation,
0 for addition, or 1 for multiplication.)
a binary operator that must be associative
the result of applying fold operator op between all the elements and z
Applies a binary operator to a start value and all elements of this bitset, going left to right.
Applies a binary operator to a start value and all elements of this bitset, going left to right.
Note: might return different results for different runs, unless the underlying collection type is ordered. or the operator is associative and commutative.
the result type of the binary operator.
the start value.
the binary operator.
the result of inserting op between consecutive elements of this bitset,
going left to right with the start value z on the left:
op(...op(z, x_1), x_2, ..., x_n)
where x1, ..., xn are the elements of this bitset.
Applies a binary operator to all elements of this bitset and a start value, going right to left.
Applies a binary operator to all elements of this bitset and a start value, going right to left.
Note: might return different results for different runs, unless the underlying collection type is ordered. or the operator is associative and commutative.
the result type of the binary operator.
the start value.
the binary operator.
the result of inserting op between consecutive elements of this bitset,
going right to left with the start value z on the right:
op(x_1, op(x_2, ... op(x_n, z)...))
where x1, ..., xn are the elements of this bitset.
Tests whether a predicate holds for all elements of this bitset.
Tests whether a predicate holds for all elements of this bitset.
the predicate used to test elements.
true if the given predicate p holds for all elements
of this bitset, otherwise false.
[use case] Applies a function f to all elements of this bitset.
Applies a function f to all elements of this bitset.
Note: this method underlies the implementation of most other bulk operations. Subclasses should re-implement this method if a more efficient implementation exists.
the function that is applied for its side-effect to every element.
The result of function f is discarded.
Returns string formatted according to given format string.
Returns string formatted according to given format string.
Format strings are as for String.format
(@see java.lang.String.format).
Creates a ranged projection of this collection with no upper-bound.
Creates a ranged projection of this collection with no upper-bound.
The lower-bound (inclusive) of the ranged projection.
A representation that corresponds to the dynamic class of the receiver object.
A representation that corresponds to the dynamic class of the receiver object.
The nature of the representation is platform dependent.
a representation that corresponds to the dynamic class of the receiver object.
not specified by SLS as a member of AnyRef
Partitions this bitset into a map of bitsets according to some discriminator function.
Partitions this bitset into a map of bitsets according to some discriminator function.
Note: this method is not re-implemented by views. This means when applied to a view it will always force the view and return a new bitset.
the type of keys returned by the discriminator function.
the discriminator function.
A map from keys to bitsets such that the following invariant holds:
(xs partition f)(k) = xs filter (x => f(x) == k) That is, every key k is bound to a bitset of those elements x
for which f(x) equals k.
Partitions elements in fixed size bitsets.
Partitions elements in fixed size bitsets.
the number of elements per group
An iterator producing bitsets of size size, except the
last will be truncated if the elements don't divide evenly.
scala.collection.Iterator, method grouped
Tests whether this bitset is known to have a finite size.
Tests whether this bitset is known to have a finite size.
All strict collections are known to have finite size. For a non-strict
collection such as Stream, the predicate returns true if all
elements have been computed. It returns false if the stream is
not yet evaluated to the end.
Note: many collection methods will not work on collections of infinite sizes.
true if this collection is known to have finite size,
false otherwise.
The hashCode method for reference types.
The hashCode method for reference types. See hashCode in scala.Any.
the hash code value for this object.
Selects the first element of this bitset.
Selects the first element of this bitset.
Note: might return different results for different runs, unless the underlying collection type is ordered.
the first element of this bitset.
if the bitset is empty.
Optionally selects the first element.
Optionally selects the first element.
Note: might return different results for different runs, unless the underlying collection type is ordered.
the first element of this bitset if it is nonempty,
None if it is empty.
Selects all elements except the last.
Selects all elements except the last.
Note: might return different results for different runs, unless the underlying collection type is ordered.
a bitset consisting of all elements of this bitset except the last one.
if the bitset is empty.
Iterates over the inits of this bitset.
Iterates over the inits of this bitset. The first value will be this
bitset and the final one will be an empty bitset, with the intervening
values the results of successive applications of init.
an iterator over all the inits of this bitset
List(1,2,3).inits = Iterator(List(1,2,3), List(1,2), List(1), Nil)
Computes the intersection between this set and another set.
Computes the intersection between this set and another set.
the set to intersect with.
a new set consisting of all elements that are both in this
set and in the given set that.
Tests if this set is empty.
Tests if this set is empty.
true if there is no element in the set, false otherwise.
Test whether the dynamic type of the receiver object is T0.
Test whether the dynamic type of the receiver object is T0.
Note that the result of the test is modulo Scala's erasure semantics.
Therefore the expression 1.isInstanceOf[String] will return false, while the
expression List(1).isInstanceOf[List[String]] will return true.
In the latter example, because the type argument is erased as part of compilation it is
not possible to check whether the contents of the list are of the specified type.
true if the receiver object is an instance of erasure of type T0; false otherwise.
Tests whether this bitset can be repeatedly traversed.
Tests whether this bitset can be repeatedly traversed.
true
Creates a new iterator over all elements contained in this iterable object.
Creates a new iterator over all elements contained in this iterable object.
the new iterator
return as a projection the set of keys in this collection
return as a projection the set of keys in this collection
Selects the last element.
Selects the last element.
Note: might return different results for different runs, unless the underlying collection type is ordered.
The last element of this bitset.
If the bitset is empty.
Returns the last key of the collection.
Returns the last key of the collection.
Optionally selects the last element.
Optionally selects the last element.
Note: might return different results for different runs, unless the underlying collection type is ordered.
the last element of this bitset$ if it is nonempty,
None if it is empty.
[use case] Builds a new collection by applying a function to all elements of this bitset.
Builds a new collection by applying a function to all elements of this bitset.
the element type of the returned collection.
the function to apply to each element.
a new bitset resulting from applying the given function
f to each element of this bitset and collecting the results.
[use case] Finds the largest element.
Finds the largest element.
the largest element of this bitset.
[use case] Finds the smallest element.
Finds the smallest element.
the smallest element of this bitset
Displays all elements of this bitset in a string.
Displays all elements of this bitset in a string.
a string representation of this bitset. In the resulting string
the string representations (w.r.t. the method toString)
of all elements of this bitset follow each other without any
separator string.
Displays all elements of this bitset in a string using a separator string.
Displays all elements of this bitset in a string using a separator string.
the separator string.
a string representation of this bitset. In the resulting string
the string representations (w.r.t. the method toString)
of all elements of this bitset are separated by the string sep.
List(1, 2, 3).mkString("|") = "1|2|3"
Displays all elements of this bitset in a string using start, end, and separator strings.
Displays all elements of this bitset in a string using start, end, and separator strings.
the starting string.
the separator string.
the ending string.
a string representation of this bitset. The resulting string
begins with the string start and ends with the string
end. Inside, the string representations (w.r.t. the method
toString) of all elements of this bitset are separated by
the string sep.
List(1, 2, 3).mkString("(", "; ", ")") = "(1; 2; 3)"
Equivalent to !(this eq that).
Equivalent to !(this eq that).
true if the argument is not a reference to the receiver object; false otherwise.
A common implementation of newBuilder for all sets in terms
of empty.
A common implementation of newBuilder for all sets in terms
of empty. Overridden for mutable sets in
`mutable.SetLike`.
Tests whether the bitset is not empty.
Tests whether the bitset is not empty.
true if the bitset contains at least one element, false otherwise.
Wakes up a single thread that is waiting on the receiver object's monitor.
Wakes up a single thread that is waiting on the receiver object's monitor.
not specified by SLS as a member of AnyRef
Wakes up all threads that are waiting on the receiver object's monitor.
Wakes up all threads that are waiting on the receiver object's monitor.
not specified by SLS as a member of AnyRef
Returns a parallel implementation of this collection.
Returns a parallel implementation of this collection.
For most collection types, this method creates a new parallel collection by copying
all the elements. For these collection, par takes linear time. Mutable collections
in this category do not produce a mutable parallel collection that has the same
underlying dataset, so changes in one collection will not be reflected in the other one.
Specific collections (e.g. ParArray or mutable.ParHashMap) override this default
behaviour by creating a parallel collection which shares the same underlying dataset.
For these collections, par takes constant or sublinear time.
All parallel collections return a reference to themselves.
a parallel implementation of this collection
The default par implementation uses the combiner provided by this method
to create a new parallel collection.
The default par implementation uses the combiner provided by this method
to create a new parallel collection.
a combiner for the parallel collection of type ParRepr
Partitions this bitset in two bitsets according to a predicate.
Partitions this bitset in two bitsets according to a predicate.
the predicate on which to partition.
a pair of bitsets: the first bitset consists of all elements that
satisfy the predicate p and the second bitset consists of all elements
that don't. The relative order of the elements in the resulting bitsets
is the same as in the original bitset.
[use case] Multiplies up the elements of this collection.
Multiplies up the elements of this collection.
the product of all elements in this bitset of numbers of type Int.
Instead of Int, any other type T with an implicit Numeric[T] implementation
can be used as element type of the bitset and as result type of product.
Examples of such types are: Long, Float, Double, BigInt.
Creates a ranged projection of this collection with both a lower-bound and an upper-bound.
Creates a ranged projection of this collection with both a lower-bound and an upper-bound.
The upper-bound (exclusive) of the ranged projection.
Creates a ranged projection of this collection.
Creates a ranged projection of this collection. Any mutations in the ranged projection will update this collection and vice versa.
Note: keys are not garuanteed to be consistent between this collection and the projection. This is the case for buffers where indexing is relative to the projection.
The lower-bound (inclusive) of the ranged projection.
None if there is no lower bound.
The upper-bound (exclusive) of the ranged projection.
None if there is no upper bound.
Reduces the elements of this bitset using the specified associative binary operator.
Reduces the elements of this bitset using the specified associative binary operator.
The order in which operations are performed on elements is unspecified and may be nondeterministic.
A type parameter for the binary operator, a supertype of A.
A binary operator that must be associative.
The result of applying reduce operator op between all the elements if the bitset is nonempty.
if this bitset is empty.
Applies a binary operator to all elements of this bitset, going left to right.
Applies a binary operator to all elements of this bitset, going left to right.
Note: might return different results for different runs, unless the underlying collection type is ordered. or the operator is associative and commutative.
the result type of the binary operator.
the binary operator.
the result of inserting op between consecutive elements of this bitset,
going left to right:
op( op( ... op(x_1, x_2) ..., x_{n-1}), x_n) where x1, ..., xn are the elements of this bitset.
if this bitset is empty.
Optionally applies a binary operator to all elements of this bitset, going left to right.
Optionally applies a binary operator to all elements of this bitset, going left to right.
Note: might return different results for different runs, unless the underlying collection type is ordered. or the operator is associative and commutative.
the result type of the binary operator.
the binary operator.
an option value containing the result of reduceLeft(op) is this bitset is nonempty,
None otherwise.
Reduces the elements of this bitset, if any, using the specified associative binary operator.
Reduces the elements of this bitset, if any, using the specified associative binary operator.
The order in which operations are performed on elements is unspecified and may be nondeterministic.
A type parameter for the binary operator, a supertype of A.
A binary operator that must be associative.
An option value containing result of applying reduce operator op between all
the elements if the collection is nonempty, and None otherwise.
Applies a binary operator to all elements of this bitset, going right to left.
Applies a binary operator to all elements of this bitset, going right to left.
Note: might return different results for different runs, unless the underlying collection type is ordered. or the operator is associative and commutative.
the result type of the binary operator.
the binary operator.
the result of inserting op between consecutive elements of this bitset,
going right to left:
op(x_1, op(x_2, ..., op(x_{n-1}, x_n)...)) where x1, ..., xn are the elements of this bitset.
if this bitset is empty.
Optionally applies a binary operator to all elements of this bitset, going right to left.
Optionally applies a binary operator to all elements of this bitset, going right to left.
Note: might return different results for different runs, unless the underlying collection type is ordered. or the operator is associative and commutative.
the result type of the binary operator.
the binary operator.
an option value containing the result of reduceRight(op) is this bitset is nonempty,
None otherwise.
The collection of type bitset underlying this TraversableLike object.
The collection of type bitset underlying this TraversableLike object.
By default this is implemented as the TraversableLike object itself,
but this can be overridden.
[use case] Checks if the other iterable collection contains the same elements in the same order as this bitset.
Checks if the other iterable collection contains the same elements in the same order as this bitset.
Note: might return different results for different runs, unless the underlying collection type is ordered.
the collection to compare with.
true, if both collections contain the same elements in the same order, false otherwise.
Computes a prefix scan of the elements of the collection.
Computes a prefix scan of the elements of the collection.
Note: The neutral element z may be applied more than once.
element type of the resulting collection
type of the resulting collection
neutral element for the operator op
the associative operator for the scan
combiner factory which provides a combiner
a new bitset containing the prefix scan of the elements in this bitset
Produces a collection containing cumulative results of applying the operator going left to right.
Produces a collection containing cumulative results of applying the operator going left to right.
Note: might return different results for different runs, unless the underlying collection type is ordered.
the type of the elements in the resulting collection
the actual type of the resulting collection
the initial value
the binary operator applied to the intermediate result and the element
an implicit value of class CanBuildFrom which determines
the result class That from the current representation type Repr and
and the new element type B.
collection with intermediate results
Produces a collection containing cumulative results of applying the operator going right to left.
Produces a collection containing cumulative results of applying the operator going right to left. The head of the collection is the last cumulative result.
Note: might return different results for different runs, unless the underlying collection type is ordered.
Example:
List(1, 2, 3, 4).scanRight(0)(_ + _) == List(10, 9, 7, 4, 0)
the type of the elements in the resulting collection
the actual type of the resulting collection
the initial value
the binary operator applied to the intermediate result and the element
an implicit value of class CanBuildFrom which determines
the result class That from the current representation type Repr and
and the new element type B.
collection with intermediate results
(Changed in version 2.9.0) The behavior of scanRight has changed. The previous behavior can be reproduced with scanRight.reverse.
The size of this bitset.
The size of this bitset.
the number of elements in this bitset.
Selects an interval of elements.
Selects an interval of elements. The returned collection is made up
of all elements x which satisfy the invariant:
from <= indexOf(x) < until
Note: might return different results for different runs, unless the underlying collection type is ordered.
a bitset containing the elements greater than or equal to
index from extending up to (but not including) index until
of this bitset.
Groups elements in fixed size blocks by passing a "sliding window" over them (as opposed to partitioning them, as is done in grouped.
Groups elements in fixed size blocks by passing a "sliding window" over them (as opposed to partitioning them, as is done in grouped.)
the number of elements per group
the distance between the first elements of successive groups (defaults to 1)
An iterator producing bitsets of size size, except the
last and the only element will be truncated if there are
fewer elements than size.
scala.collection.Iterator, method sliding
Groups elements in fixed size blocks by passing a "sliding window" over them (as opposed to partitioning them, as is done in grouped.
Groups elements in fixed size blocks by passing a "sliding window" over them (as opposed to partitioning them, as is done in grouped.)
the number of elements per group
An iterator producing bitsets of size size, except the
last and the only element will be truncated if there are
fewer elements than size.
scala.collection.Iterator, method sliding
Splits this bitset into a prefix/suffix pair according to a predicate.
Splits this bitset into a prefix/suffix pair according to a predicate.
Note: c span p is equivalent to (but possibly more efficient than)
(c takeWhile p, c dropWhile p), provided the evaluation of the
predicate p does not cause any side-effects.
Note: might return different results for different runs, unless the underlying collection type is ordered.
a pair consisting of the longest prefix of this bitset whose
elements all satisfy p, and the rest of this bitset.
Splits this bitset into two at a given position.
Splits this bitset into two at a given position.
Note: c splitAt n is equivalent to (but possibly more efficient than)
(c take n, c drop n).
Note: might return different results for different runs, unless the underlying collection type is ordered.
the position at which to split.
a pair of bitsets consisting of the first n
elements of this bitset, and the other elements.
Defines the prefix of this object's toString representation.
Defines the prefix of this object's toString representation.
a string representation which starts the result of toString applied to this set.
Unless overridden this is simply "Set".
Tests whether this bitset is a subset of another bitset.
Tests whether this bitset is a subset of another bitset.
the bitset to test.
true if this bitset is a subset of other, i.e. if
every bit of this set is also an element in other.
Tests whether this set is a subset of another set.
Tests whether this set is a subset of another set.
the set to test.
true if this set is a subset of that, i.e. if
every element of this set is also an element of that.
An iterator over all subsets of this set.
An iterator over all subsets of this set of the given size.
An iterator over all subsets of this set of the given size. If the requested size is impossible, an empty iterator is returned.
the size of the subsets.
the iterator.
[use case] Sums up the elements of this collection.
Sums up the elements of this collection.
the sum of all elements in this bitset of numbers of type Int.
Instead of Int, any other type T with an implicit Numeric[T] implementation
can be used as element type of the bitset and as result type of sum.
Examples of such types are: Long, Float, Double, BigInt.
Selects all elements except the first.
Selects all elements except the first.
Note: might return different results for different runs, unless the underlying collection type is ordered.
a bitset consisting of all elements of this bitset except the first one.
if the bitset is empty.
Iterates over the tails of this bitset.
Iterates over the tails of this bitset. The first value will be this
bitset and the final one will be an empty bitset, with the intervening
values the results of successive applications of tail.
an iterator over all the tails of this bitset
List(1,2,3).tails = Iterator(List(1,2,3), List(2,3), List(3), Nil)
Selects first n elements.
Selects first n elements.
Note: might return different results for different runs, unless the underlying collection type is ordered.
the number of elements to take from this bitset.
a bitset consisting only of the first n elements of this bitset,
or else the whole bitset, if it has less than n elements.
Selects last n elements.
Selects last n elements.
Note: might return different results for different runs, unless the underlying collection type is ordered.
the number of elements to take
a bitset consisting only of the last n elements of this bitset, or else the
whole bitset, if it has less than n elements.
Takes longest prefix of elements that satisfy a predicate.
Takes longest prefix of elements that satisfy a predicate.
Note: might return different results for different runs, unless the underlying collection type is ordered.
the longest prefix of this bitset whose elements all satisfy
the predicate p.
The underlying collection seen as an instance of BitSet
The underlying collection seen as an instance of BitSet
[use case] Converts this bitset into another by copying all elements.
Converts this bitset into another by copying all elements.
The collection type to build.
a new collection containing all elements of this bitset.
Create a range projection of this collection with no lower-bound.
Create a range projection of this collection with no lower-bound.
The upper-bound (inclusive) of the ranged projection.
[use case] Converts this bitset to an array.
Converts this bitset to an array.
an array containing all elements of this bitset.
An ClassTag must be available for the element type of this bitset.
Creates a bit mask for this set as a new array of longs
Converts this bitset to a mutable buffer.
Converts this bitset to a mutable buffer.
a buffer containing all elements of this bitset.
A conversion from collections of type Repr to BitSet
A conversion from collections of type Repr to BitSet
Converts this bitset to an indexed sequence.
Converts this bitset to an indexed sequence.
an indexed sequence containing all elements of this bitset.
Converts this bitset to an iterable collection.
Converts this bitset to an iterable collection. Note that
the choice of target Iterable is lazy in this default implementation
as this TraversableOnce may be lazy and unevaluated (i.e. it may
be an iterator which is only traversable once).
an Iterable containing all elements of this bitset.
Returns an Iterator over the elements in this bitset.
Returns an Iterator over the elements in this bitset. Will return the same Iterator if this instance is already an Iterator.
an Iterator containing all elements of this bitset.
Converts this bitset to a list.
Converts this bitset to a list.
a list containing all elements of this bitset.
[use case] Converts this bitset to a map.
Converts this bitset to a map. This method is unavailable unless the elements are members of Tuple2, each ((T, U)) becoming a key-value pair in the map. Duplicate keys will be overwritten by later keys: if this is an unordered collection, which key is in the resulting map is undefined.
a map of type immutable.Map[T, U]
containing all key/value pairs of type (T, U) of this bitset.
Converts this bitset to a sequence.
Converts this bitset to a sequence. As with toIterable, it's lazy
in this default implementation, as this TraversableOnce may be
lazy and unevaluated.
a sequence containing all elements of this bitset.
Converts this bitset to a set.
Converts this bitset to a set.
a set containing all elements of this bitset.
Converts this bitset to a stream.
Converts this bitset to a stream.
a stream containing all elements of this bitset.
Creates a String representation of this object.
Creates a String representation of this object. The default representation is platform dependent. On the java platform it is the concatenation of the class name, "@", and the object's hashcode in hexadecimal.
a String representation of the object.
Converts this bitset to an unspecified Traversable.
Converts this bitset to an unspecified Traversable. Will return the same collection if this instance is already Traversable.
a Traversable containing all elements of this bitset.
Converts this bitset to a Vector.
Converts this bitset to a Vector.
a vector containing all elements of this bitset.
Computes the union between of set and another set.
Computes the union between of set and another set.
the set to form the union with.
a new set consisting of all elements that are in this
set or in the given set that.
Creates a ranged projection of this collection with no lower-bound.
Creates a ranged projection of this collection with no lower-bound.
The upper-bound (exclusive) of the ranged projection.
Creates a non-strict view of a slice of this bitset.
Creates a non-strict view of a slice of this bitset.
Note: the difference between view and slice is that view produces
a view of the current bitset, whereas slice produces a new bitset.
Note: view(from, to) is equivalent to view.slice(from, to)
Note: might return different results for different runs, unless the underlying collection type is ordered.
the index of the first element of the view
the index of the element following the view
a non-strict view of a slice of this bitset, starting at index from
and extending up to (but not including) index until.
Creates a non-strict view of this bitset.
Creates a non-strict view of this bitset.
a non-strict view of this bitset.
Creates a non-strict filter of this bitset.
Creates a non-strict filter of this bitset.
Note: the difference between c filter p and c withFilter p is that
the former creates a new collection, whereas the latter only
restricts the domain of subsequent map, flatMap, foreach,
and withFilter operations.
Note: might return different results for different runs, unless the underlying collection type is ordered.
the predicate used to test elements.
an object of class WithFilter, which supports
map, flatMap, foreach, and withFilter operations.
All these operations apply to those elements of this bitset
which satisfy the predicate p.
[use case] Returns a bitset formed from this bitset and another iterable collection by combining corresponding elements in pairs.
Returns a bitset formed from this bitset and another iterable collection by combining corresponding elements in pairs. If one of the two collections is longer than the other, its remaining elements are ignored.
Note: might return different results for different runs, unless the underlying collection type is ordered.
the type of the second half of the returned pairs
The iterable providing the second half of each result pair
a new bitset containing pairs consisting of
corresponding elements of this bitset and that. The length
of the returned collection is the minimum of the lengths of this bitset and that.
[use case] Returns a bitset formed from this bitset and another iterable collection by combining corresponding elements in pairs.
Returns a bitset formed from this bitset and another iterable collection by combining corresponding elements in pairs. If one of the two collections is shorter than the other, placeholder elements are used to extend the shorter collection to the length of the longer.
Note: might return different results for different runs, unless the underlying collection type is ordered.
the type of the second half of the returned pairs
The iterable providing the second half of each result pair
the element to be used to fill up the result if this bitset is shorter than that.
the element to be used to fill up the result if that is shorter than this bitset.
a new bitset containing pairs consisting of
corresponding elements of this bitset and that. The length
of the returned collection is the maximum of the lengths of this bitset and that.
If this bitset is shorter than that, thisElem values are used to pad the result.
If that is shorter than this bitset, thatElem values are used to pad the result.
[use case] Zips this bitset with its indices.
Zips this bitset with its indices.
Note: might return different results for different runs, unless the underlying collection type is ordered.
A new bitset containing pairs consisting of all elements of this
bitset paired with their index. Indices start at 0.
List("a", "b", "c").zipWithIndex = List(("a", 0), ("b", 1), ("c", 2))
Computes the union between this bitset and another bitset by performing a bitwise "or".
Computes the union between this bitset and another bitset by performing a bitwise "or".
the bitset to form the union with.
a new bitset consisting of all bits that are in this
bitset or in the given bitset other.
Computes the union between this set and another set.
Computes the union between this set and another set.
Note: Same as union.
the set to form the union with.
a new set consisting of all elements that are in this
set or in the given set that.
(bitSetLike: StringAdd).+(other)
(bitSetLike: MonadOps[Int]).filter(p)
(bitSetLike: MonadOps[Int]).flatMap(f)
(bitSetLike: MonadOps[Int]).map(f)
(bitSetLike: StringAdd).self
(bitSetLike: StringFormat).self
(bitSetLike: MonadOps[Int]).withFilter(p)
A syntactic sugar for out of order folding.
A syntactic sugar for out of order folding. See fold.
Example:
scala> val a = LinkedList(1,2,3,4) a: scala.collection.mutable.LinkedList[Int] = LinkedList(1, 2, 3, 4) scala> val b = (a /:\ 5)(_+_) b: Int = 15
(Since version 2.10.0) use fold instead
(bitSetLike: ArrowAssoc[BitSetLike[This]]).x
(Since version 2.10.0) Use leftOfArrow instead
(bitSetLike: Ensuring[BitSetLike[This]]).x
(Since version 2.10.0) Use resultOfEnsuring instead
A template trait for bitsets.
Bitsets are sets of non-negative integers which are represented as variable-size arrays of bits packed into 64-bit words. The memory footprint of a bitset is determined by the largest number stored in it.
This trait provides most of the operations of a
BitSetindependently of its representation. It is inherited by all concrete implementations of bitsets.the type of the bitset itself.